Guide to make a pool on your own

tamping tools user report

Before installing a pool, soil preparation is very important. The floor must be stable, level and flat to prevent damage to the structure of your pool. Leveling the ground for a swimming pool is essential to ensure a good holding of the pool over time. From the tamping tools user report you can now find the solutions at their easiests.

Why level the ground for laying a pool?

Leveling is leveling, leveling or smoothing a surface. This can be done using specific tools and after different stages of preparation. A swimming pool must be placed on a flat ground. Otherwise, the water can put pressure on the structure of the pool, on the side where the floor leans. The soil must be stable because the volume of water in a pool is a significant weight.

The floor must also be properly leveled at the pool location, to avoid damage due to possible landslides or landslides. Beforehand, depending on the configuration of your pool, you may need to dig the site or add gravel or sand before leveling the ground. This will be the case if your land is slightly sloping, or if you want to install a semi-buried pool ask a professional advice in any case.

How to level the ground for a pool?

You may need to level the ground with sand before placing your above-ground pool kit. Sand is a good solution for smoothing the surface before installing a freestanding pool for example. You can water the sand to make it more compact.

It is also possible to level a concrete slab, depending on the type of pool. Leveling a concrete slab is a job that requires specific know-how. Preparing the concrete, pouring it and smoothing it are not so simple steps as they seem especially since it must be reactive because the concrete dries quickly.

tamping tools user report

Although the tubular pool is much simpler and faster to install than a semi-in-ground or underground pool, it is important to prepare the ground on which it will be laid. Its lifespan and your bathing comfort depend on it. What is the best surface for laying a tubular pool? What are the most common protections to put on the ground? How to prepare the ground for a tubular pool?

Floor for tubular pool: what is the best surface?

Before assembling your tubular pool, you must examine the nature of the soil. Depending on the type you meet, you will have to adapt the preparation of the field. The ideal is to install your tubular pool on a stable, flat and clean ground that is to say without roots or pebbles.

The ideal location for your tubular pool is the lawn or the land. Avoid, however, the installation on sand because the pool could sink with the weight of the water, create an imbalance and deform with time. If you still want to put sand, then you will have to form a form to contain the frame of the pool. If your land is slightly sloping, it is advisable to disburse and stabilize the ground with a concrete slab. To ensure your rear, nothing prevents you to choose a concrete slab about 15 cm thick even if your land is already flat and able to receive your tubular pool. If your land is rocky, it is essential to put a concrete slab to avoid tearing the bottom of your pool.